• HEAT IS CAPTURED UNDER THE FORM OF SOLAR RADITION, ENVIRONMENTAL TEMPERATURE, RAIN, WIND AND EVEN SNOW
  • THE HEAT PRODUCED ON COLDER DAYS, EVEN AT NIGHT IS SUFFICIENT TO ATTAIN THE WATER TEMPERATURE DESIRED
  • THE SOLAR PANEL IS LIGHT, DISCREET AND VERSATILE IN TERMS OF WHERE TO PUT IT
  • OUTSIDE CYLINDER CONDENSER (NO CONTACT WITH WATER)
  • 3RD GENERATION THERMODYNAMIC SOLAR ENERGY
  • HOT WATER UP TO 55ºC AVAILABLE 24h PER DAY
  • ALMOST NON-EXISTENT MAINTENANCE
  • THE ENERGY CONSUMPTION OF THE EQUIPMENT IS REDUCED DUE TO A SUPER EFFICIENT COMPRESSOR
  • NO DEFROST CYCLE

Autonomous Hot Water solution available in version with 1 thermodynamic solar panel


Eco offers a wide range designed for professionals from this industry, with various capacities, available in models of 200 to 500 litres. Version of 1 or 2 thermodynamic solar panel and thermal storage equipped with or without supplementary coil.


 

 

 

ECO - Technical Features (x1 panel)


STORAGE WATER HEATER 250I 300I 250ESM 250ESM 300ESM 250IX 300IX
Net Weight Kg. 45 50 73 83 95 52 57
Volume L 250 300 200 250 300 245 295
Storage Water Heater Material (Stainless Steel-i | Enamelled Steel-e) i i e e e i i
Cathodic Protection Mg Anode (1”1/4)
Hydraulic Connections Water - Inlet and Outlet Pol. 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1”
PT Valve 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
Recirculation 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
Insulation High density polyurethane 50mm
Maximum Pressure Bar 7 7 7 7 7 7 7
Maximum Operating Temperature 0C 80 80 80 80 80 80 80
Heat Loss (EN12897) kWh/24h 1.01 1.17 1.04 1.20 1.39 1.01 1.17
 
THERMODYNAMIC SOLAR PANEL
Material - Anodized Aluminum Solarcoat
Dimensions (W x H x D) mm 2000 x 800 x 20
Weight Kg. 8
 
THERMODYNAMIC BLOCK
Dimensions (W x H x D) mm 320 / 710 /280
Weight Kg. 17.5
Absorbed Power (Avg/Max) W 390 | 650
Thermal Power (Avg/Max) W 1400 | 2380
Electric Support Power W 1500
Compressor Type - Hermetic
Compressor Noise Level dB 39
Refrigerant Fluid / Qt.1 -/g R134a / 1100
Piping Material - Copper (DHP ISO1337)
Liquid line | Asp. Pol. 1/4” | 3/8”
Power Supply V / Hz 230 / Single-phase / 50 or 602
Fuse (General | Resistance) A 10 | 10
 
PERFORMANCE4 250I 300I 250ESM 250ESM 300ESM 250IX 300IX
Load Profile XL XL L XL XL XL XL
Coefficient of Performance (COP) 3.8 3.7 3.6 3.8 3.7 3.8 3.7
Energy Efficiency Class A+ A+ A++ A+ A+ A+ A+
Energy Efficiency 155 151 154 155 151 155 151
Annual Energy Consumption 1078 1111 664 1078 1111 1078 1111
Amount of useful water at 400C 349 389 247 349 389 342 382
 
1The amount of fluid must be verified by the installer. In certain cases, it is necessary to adjust the amount of fluid to guarantee the correct functioning of the system
2The 60 Hz frequency is only available upon order.
3 According to EN16147, Delegated Regulation (EU) Nº812/2013 and Delegated Regulation (EU) Nº814/2013.
 
DIMENSIONS mm 250I 300I 250ESM 250ESM 300ESM 250IX 300IX
A 99 107 106 99 102 99 107
B - - - - - 215 236
C - - - - - 706 636
D 840 787 840 840 782 840 787
E 1025 1096 1025 1025 1096 1025 1096
F 1343 1187 1171 1351 1182 1343 1187
G 1475 1330 1299 1477 1325 1475 1330
H 370 370 370 370 370 370 370
I 765 765 765 765 765 765 765
J 1540 1400 1370 1540 1430 1540 1400
K 580 650 580 580 650 580 650
L 800
M 2000
N 20
O 875 945 875 875 945 875 945
 
 

ECO - Technical Features (2 panel)


STORAGE WATER HEATER 250IS 300IS 300ESMS 250ISX 300ISX 500IS 500ISX
Net Weight Kg. 45 50 95 52 57 66 93
Volume L 250 300 300 245 295 455 455
Storage Water Heater Material (Stainless Steel-i | Enamelled Steel-e) i i e i i i i
Cathodic Protection Mg Anode (1”1/4)
Hydraulic Connections Water - Inlet and Outlet Pol. 3/4” 3/4” 3/4” 3/4” 3/4” 1” 1”
PT Valve 1/2” 1/2” 1/2” 1/2” 1/2” 1/2” 1/2”
Recirculation 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
Insulation High density polyurethane 50mm
Maximum Pressure Bar 7 7 7 7 7 7 7
Maximum Operating Temperature 0C 80 80 80 80 80 80 80
Heat Loss (EN12897) kWh/24h 1.01 1.17 1.39 1.01 1.17 1.81 1.81
 
THERMODYNAMIC SOLAR PANEL
Material - Anodized Aluminum Solarcoat
Dimensions (W x H x D) mm 2000 x 800 x 20
Weight Kg. 8
 
THERMODYNAMIC BLOCK
Dimensions (W x H x D) mm 320 / 710 /280
Weight Kg. 17.5
Absorbed Power (Avg/Max) W 390 | 650
Thermal Power (Avg/Max) W 1400 | 2380
Electric Emergency Backup W 1500 2200
Compressor Type - Hermetic
Compressor Noise Level dB 39
Refrigerant Fluid / Qt.2 -/g R134a / 1100
Piping Material - Copper (DHP ISO1337)
Liquid Line | Suction Line Pol. 1/4” | 3/8”
Power Supply V / Hz 230 / Single-phase / 50 or 603
Fuse (General | Resistence) A 10 | 10
Operating Temperature 0C -5 / 45
 
PERFORMANCE4 250IS 300IS 300ESMS 250ISX 300ISX 500IS 500ISX
Load Profile XL XL XL XL XL XL XL
Coefficient of Performance (COP) 3.7 3.6 3.6 3.7 3.6 3.5 3.5
Energy Efficiency Class A+ A+ A++ A+ A+ A+ A+
Energy Efficiency 152 151 151 152 151 139 139
Annual Energy Consumption 1103 1112 1112 1103 1112 1553 1553
Amount of useful water at 400C 349 389 389 349 389 599 592
 
1The amount of fluid must be verified by the installer. In certain cases, it is necessary to adjust the amount of fluid to guarantee the correct functioning of the system
2The 60 Hz frequency is only available upon order.
3 According to EN16147, Delegated Regulation (EU) Nº812/2013 and Delegated Regulation (EU) Nº814/2013.
DIMENSIONS mm 250IS 300IS 300ESMS 250ISX 300ISX 500IS 500ISX
A 99 107 102 99 107 102 102
B - - - 215 236 - 635
C - - - 706 636 - 1525
D 840 787 782 840 787 782 782
E 1025 1096 1096 1025 1096 1096 1093
F 1343 1187 1182 1343 1187 1770 1770
G 1475 1330 1325 1475 1330 1937 1937
H 370 370 370 370 370 370 370
I 765 765 765 765 765 765 765
J 1540 1400 1430 1540 1400 2020 2020
K 580 650 650 580 650 650 650
L  
M 2000
N 20
O 875 945 945 875 945 945 945
 
  • 1DHW Cylinder
  • 2Condenser (Coil)
  • 3Optional Supplementary Coil
  • 4Ceramic Resistance + Thermostat + Temperature Sensor
  • 5High Density Insulation
  • 6Outside Coating
  • 7Thermodynamic Block
  • 8Cover
  • 9Electronic Controller

Versions with 1 or 2 Thermodynamic Solar Panels Enamelled or stainless steel cylinder With or without Supplementary Coil.



THERMODYNAMIC
SOLAR PANEL



  • ANODIZED ALUMINIUM, WITH FLEXIBLE COATING.
  • LIGHT WEIGHT – ONLY 8 KILOS, EASY TO TRANSPORT AND INSTALL.
  • DIMENSIONS: 2m X 0,8m X 0,02m.
  • NO GLASS, RUBBER OR FRAGILE MATERIALS.
  • NO RISK OF OVER HEATING.
  • NO RISK OF FREEZING.
  • HIGH RESISTANCE IN SALINE ENVIRONMENT.
  • HIGH RESISTANCE TO HUMIDITY.
  • IT CAN BE INSTALLED FROM 10º TO 85º IN A HORIZONTAL POSITION.
  • IT CAN BE INSTALLED ON THE ROOF, WALL, IN THE GARDEN, ETC…
  • THE PANEL DOES NOT LOSE ITS EFFICIENCY WITH TIME OR WITH DIRT.
  • NO NEED TO CLEAN.
  • ESTIMATED USEFUL LIFE OF 25 YEARS.
  • APPROVED FOR CORROSION TEST SALINE FOG EQUIVALENT TO 20 YEARS.

 

THERMODYNAMIC SOLAR SYSTEM
OPERATING PRINCIPLE


EQUIPMENT

> Without ducts.
> Without ventilators.
> Without defrost cycles that use up energy.
> Super efficient compressor with low energy consumption.
> No need to install support equipment.
> Hot water guaranteed, available day and night, hail, rain, wind or shine up to 55ºc.

SOLAR PANEL

> Captures heat regardless of climate.
> Primary circuit does not need to dissipate excess heat on hotter days.
> Easy integration with architecture, versatile, no visual impact.

 

 

The Thermodynamics Solar System joins two incomplete technologies, the heat pump and the solar thermal collector. Heat pumps are quite efficient equipment but the heat hey produce from their renewable component varies only according to changes in the temperature of the environment. Thermal solar collectors are the best source of heat on hot and sunny days but they are totally inefficient whenever there is no sun. The Thermodynamic Solar Technology manages to surpass the limitations of
both the heat pump and solar collector technologies. Through the cooling liquid (R134a or R407c) which covers a closed circuit, the liquid goes into the solar panel and suffers the action of sun, rain, wind, environment temperature and other climate factors. During this process the liquid gains heat in a more favourable way than a heat pump. After this stage, the heat is transferred to an exchanger with the help of a small compressor, which heats the water. The liquid cools down and the circuit is repeated.
As the fluid has a boiling temperature of approximately -30ºC, the system works even when there is no sun and it even works at night, providing hot water at 55ºC, day and night, hail, rain, wind or shine, unlike the traditional solar thermal system. The energy consumption of the system is basically the same as a fridge compressor that makes the liquid circulate. There are no ventilators that help the evaporation process, or defrost cycles, which imply unnecessary energy consumption, unlike what happens with heat pumps.
 
  • 1LCD colour screen
  • 2ON / OFF General
  • 3ON / OFF Compressor
  • 4ON / OFF Anti-legionella
  • 5Menu
  • 6Electrical support (malfunction)
  • 7Execute | Lock / Unlock
ECO Operating Mode
The equipment only works as a Thermodynamic Solar System.
AUTO Operating Mode
The equipment works as a Thermodynamic Solar System and/or electrical support should it be required.
BOOST Operating mode
The equipment works with a Thermodynamic Solar System and electrical support simultaneously.

 

Company, Products, Associates, Co-Funded Project

c