This content is restricted to professionals.
Register to access this exclusive content. If you already have your access data, log in
Eco
State-of-the-art thermodynamic solar system, specially designed for domestic water heating. The ideal solution for your home.
Hot water up to 550C, 24 hours a day, with maximum efficiency.
The ECO is available in capacities from 250 to 500 litres. Version with 1 or 2 thermodynamic solar panels and water heaters equipped with or without an additional coil, made of stainless steel or enamelled. It consists of an indoor unit, the water heater, and the outdoor unit, the thermodynamic solar panel.
Product characteristics
Technical Data
Downloads
Product characteristics
EFFICIENCY & QUALITY
IN DOMESTIC HOT WATER PRODUCTION
- Stainless steel or enamelled cylinder
- High level of efficiency and ecology
- Quiet operation
- Easy installation
- Smart photovoltaic function
- Anti-legionella function
- Optional coil
- Controller with software in 6 languages
- HP Keymark Certification
THERMODYNAMIC SOLAR PANEL
- Anodized aluminium, with solocoat flexible finishing
- Easy to transport and install, only 8 kg and 2×0,8 m.
- No glass, rubber or fragile materials
- No overheating and freezing problems
- It can be installed on the roof, wall, garden, etc.
- Panel efficiency does not decrease with age or dirt
- No need for cleaning and humidity resistance
- Estimated lifespan of 25 years
- Passed the corrosion test in a salt fog test equivalent to 20 years
- Solar Keymark Certification
24 HOURS A DAY / 7 DAYS A WEEK / 365 DAYS A YEAR
SOLAR PERFORMANCE
Tested and certified according to the most rigorous European standards it has achived an extraordinary coefficient of performance of 3,8 according to the EN16147. The testing was carried out without solar irradiance, wind or rain. To enhance the real operating performance even more we advise to instal the thermody- namic solar pane facing South (North on the southern hemisphere), east or west. Vertically or horizontally on a wall, roof, flat roofbut always on a landscape position.
SOLID AND ROBUST
The thermodynamic solar panel is made of anodised aluminium with a special Solokote finishing that ensures it’s robust and long-lasting against corrosion, in particular when exposed to saline and/or aggressive environments. This innovative technical feature allows energie to provide a 10 years warranty against corrosion, ensuring peace of mind to the end user.
SIMPLE AND ERGONOMIC
The high efficiency of the hot water cylinder is achieved by using a high-density polyurethane foam that ensures a low heat loss rate, being able to keep the water heated for several days in a row even if the units is turned off.
SOPHISTICATED
The equipment’s indoor unit has a stainless steel or enamelled cylinder, as well as an external condens- er. High density injected polyurethane insulation with cathodic protection. The thermodynamic block is equipped with a state-of-the-art compres- sor, with one of the lowest electrical consumptions on the market.
THERMODYNAMIC SOLAR SYSTEM
WORKING PRINCIPLE
The evaporation of the fluid that runs inside the closed looped circuit happens on the solar panel by capturing the heat from the sun, wind, rain and surrounding air by natural convection.
The heated fluid then travels to the compressor, that will compress the fluid increasing its pressure and also it’s temperature.
Then it goes to the heat exchanger where where this heat is transferred to the water.
After this, an expansion valve will make the pressure and temperature drop to sub-zero values. The fluid travels up to the thermodynamic solar panel and the cycle repeats again.
EQUIPMENT
- No ducts and no fans
- No energy-consuming defrost cycles
- Super efficient low consumption compressor
- No need to install support equipment
PAINEL SOLAR
- Captures heat regardless of weather factors
- Primary circuit does not need to dissipate excess heat on hotter day
- Easy architectural integration, versatile without visual impact
ELECTRONIC CONTROLLER
DOMESTIC HOT WATER PRODUCTION
ECO Operating Mode
The equipment only works as a Thermodynamic Solar System.
AUTO Operating Mode The equipment works as a Thermodynamic Solar System and/or electrical support should be required.
BOOST Operating Mode
The equipment works with a Thermodynamic Solar System and electrical support simultaneously.
PHOTOVOLTAIC INTELLIGENT FUNCTION
Take Full advantage of your PV System:
- Sets new standards of smart energy management.
- Maximize your PV Solar Panels production and reduce your DHW costs.
- Maximize the solar irradiation available by having the thermodynamic solar system working more when there is more sun available.
- Get the balance between PV production and consumption with our intelligent controller.
Thermodynamic Solar Panel
Storage Water Heater
Thermodynamic Block
Photovoltaic Panels
Inverter
SAVING UP TO
0
%
- Considering ECO250
- 7 hours of operation per day
- Consumption of 0.39 kW/h
- Required energy/month: 0.39 kW x 7h x 30 days = 81.9 kWh/month
DOMESTIC ENERGY CONSUMPTION With conventional heating equipment
Technical Data
ECO – 1 Panel
| STORAGE WATER HEATER | 250I | 300I | 200ESM | 250ESM | 300ESM | 250IX | 300IX | ||
|---|---|---|---|---|---|---|---|---|---|
| Net Weight | Kg. | 45 | 50 | 73 | 83 | 95 | 52 | 57 | |
| Volume | L | 250 | 300 | 200 | 250 | 300 | 245 | 295 | |
| Storage Water Heater Material (Stainless Steel-i | Enamelled Steel-e) | i | i | e | e | e | i | i | ||
| Cathodic Protection | Mg Anode (1”1/4) | ||||||||
| Hydraulic Connections | Water – Inlet and Outlet | Pol. | 3/4” | 3/4” | 3/4” | 3/4” | 3/4” | 1” | 1” |
| PT Valve | 1/2” | 1/2” | 1/2” | 1/2” | 1/2” | 1/2” | 1/2” | ||
| Recirculation | 3/4” | 3/4” | 3/4” | 3/4” | 3/4” | 3/4” | 3/4” | ||
| Insulation | High density polyurethane 50mm | ||||||||
| Maximum Pressure | Bar | 7 | 7 | 7 | 7 | 7 | 7 | 7 | |
| Maximum Operating Temperature | °C | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Heat Loss (EN12897) | kWh/24h | 1.01 | 1.17 | 1.04 | 1.20 | 1.39 | 1.01 | 1.17 | |
| THERMODYNAMIC SOLAR PANEL | |||||||||
| Material | – | Anodized Aluminum Solarcoat | |||||||
| Dimensions (W x H x D) | mm | 2000 x 800 x 20 | |||||||
| Weight | Kg. | 8 | |||||||
| THERMODYNAMIC BLOCK | |||||||||
| Dimensions (W x H x D) | mm | 320 / 710 /280 | |||||||
| Weight | Kg. | 17.5 | |||||||
| Absorbed Power (Avg/Max) | W | 390 | 650 | |||||||
| Thermal Power (Avg/Max) | W | 1400 | 2380 | |||||||
| Electric Support Power | W | 1500 | |||||||
| Compressor Type | – | Hermetic | |||||||
| Compressor Noise Level | dB | 39 | |||||||
| Refrigerant Fluid / Qt. (1) | -/g | R134a / 1100 | |||||||
| Piping Material | – | Copper (DHP ISO1337) | |||||||
| Liquid line | Asp. | Pol. | 1/4” | 3/8” | |||||||
| Power Supply | V / Hz | 230 / Single-phase / 50 or 60 (2) | |||||||
| Fuse (General | Resistance) | A | 10 | 10 | |||||||
| PERFORMANCE (3) | 250I | 300I | 250ESM | 250ESM | 300ESM | 250IX | 300IX | ||
| Load Profile | XL | XL | L | XL | XL | XL | XL | ||
| Coefficient of Performance (COP) | 3.8 | 3.7 | 3.6 | 3.8 | 3.7 | 3.8 | 3.8 | ||
| Energy Efficiency Class | A+ | A+ | A++ | A+ | A+ | A+ | A+ | ||
| Energy Efficiency | 155 | 151 | 154 | 155 | 151 | 155 | 151 | ||
| Annual Energy Consumption | 1078 | 1111 | 664 | 1078 | 1111 | 1078 | 1111 | ||
| Amount of useful water at 40°C | 349 | 389 | 247 | 349 | 389 | 342 | 382 | ||
| (1) The amount of fluid must be verified by the installer. In certain cases, it is necessary to adjust the amount of fluid to guarantee the correct functioning of the system (2) The 60 Hz frequency is only available upon order. (3) According to EN16147, Delegated Regulation (EU) Nº812/2013 and Delegated Regulation (EU) Nº814/2013. |
|||||||||
| DIMENSIONS mm | 250I | 300I | 250ESM | 250ESM | 300ESM | 250IX | 300IX | ||
| A | 99 | 107 | 106 | 99 | 102 | 99 | 107 | ||
| B | – | – | – | – | – | 215 | 236 | ||
| C | – | – | – | – | – | 706 | 636 | ||
| D | 840 | 787 | 840 | 840 | 782 | 840 | 787 | ||
| E | 1025 | 1096 | 1025 | 1025 | 1096 | 1025 | 1096 | ||
| F | 1343 | 1187 | 1171 | 1351 | 1182 | 1343 | 1187 | ||
| G | 1475 | 1330 | 1299 | 1477 | 1325 | 1475 | 1330 | ||
| H | 370 | 370 | 370 | 370 | 370 | 370 | 370 | ||
| I | 765 | 765 | 765 | 765 | 765 | 765 | 765 | ||
| J | 1540 | 1400 | 1370 | 1540 | 1430 | 1540 | 1400 | ||
| K | 580 | 650 | 580 | 580 | 650 | 580 | 650 | ||
| L | 800 | ||||||||
| M | 2000 | ||||||||
| N | 20 | ||||||||
| O | 875 | 945 | 875 | 875 | 945 | 875 | 945 | ||
ECO – 2 Panels
| STORAGE WATER HEATER | 250IS | 300IS | 300ESMS | 250ISX | 300ISX | 500IS | 500ISX | ||
|---|---|---|---|---|---|---|---|---|---|
| Net Weight | Kg. | 45 | 50 | 95 | 52 | 57 | 66 | 93 | |
| Volume | L | 250 | 300 | 300 | 245 | 295 | 455 | 455 | |
| Storage Water Heater Material (Stainless Steel-i | Enamelled Steel-e) | i | i | e | i | i | i | i | ||
| Cathodic Protection | Mg Anode (1″1/4) | ||||||||
| Hydraulic Connections | Water – Inlet and Outlet | Pol. | 3/4″ | 3/4″ | 3/4″ | 3/4″ | 3/4″ | 1″ | 1″ |
| PT Valve | 1/2″ | 1/2″ | 1/2″ | 1/2″ | 1/2″ | 1/2″ | 1/2″ | ||
| Recirculation | 3/4″ | 3/4″ | 3/4″ | 3/4″ | 3/4″ | 3/4″ | 3/4″ | ||
| Insulation | High density polyurethane 50mm | ||||||||
| Maximum Pressure | Bar | 7 | 7 | 7 | 7 | 7 | 7 | 7 | |
| Maximum Operating Temperature | °C | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Heat Loss (EN12897) | kWh/24h | 1.01 | 1,17 | 1.39 | 1,01 | 1,17 | 1.81 | 1.81 | |
| THERMODYNAMIC SOLAR PANEL | |||||||||
| Material | – | Anodized Aluminum Solarcoat | |||||||
| Dimensions (W x H x D) | mm | 2000 x 800 x 20 | |||||||
| Weight | Kg. | 8 | |||||||
| THERMODYNAMIC BLOCK | |||||||||
| Dimensions (W x H x D) | mm | 320 / 710 /280 | |||||||
| Weight | Kg. | 17.5 | |||||||
| Absorbed Power (Avg/Max) | W | 390 | 650 | |||||||
| Thermal Power (Avg/Max) | W | 1400 | 2380 | |||||||
| Electric Emergency Backup | W | 1500 | 2200 | ||||||
| Compressor Type | – | Hermetic | |||||||
| Compressor Noise Level | dB | 39 | |||||||
| Refrigerant Fluid / Qt. (1) | -/g | R134a / 1100 | |||||||
| Piping Material | – | Copper (DHP ISO1337) | |||||||
| Liquid Line | Suction Line | Pol. | 1/4″ | 3/8″ | |||||||
| Power Supply | V / Hz | 230 / Single-phase / 50 or 60 (2) | |||||||
| Fuse (General | Resistence) | A | 10 | 10 | |||||||
| Operating Temperature | °C | -5 / 45 | |||||||
| PERFORMANCE (3) | 250IS | 300IS | 300ESMS | 250ISX | 300ISX | 500IS | 500ISX | ||
| Load Profile | XL | XL | XL | XL | XL | XL | XL | ||
| Coefficient of Performance (COP) | 3,7 | 3,6 | 3,6 | 3,7 | 3,6 | 3,5 | 3,5 | ||
| Energy Efficiency Class | A+ | A+ | A++ | A+ | A+ | A+ | A+ | ||
| Energy Efficiency | 152 | 151 | 151 | 152 | 151 | 139 | 139 | ||
| Annual Energy Consumption | 1103 | 1112 | 1112 | 1103 | 1112 | 1553 | 1553 | ||
| Amount of useful water at 40°C | 349 | 389 | 389 | 349 | 389 | 599 | 592 | ||
| (1) The amount of fluid must be verified by the installer. In certain cases, it is necessary to adjust the amount of fluid to guarantee the correct functioning of the system (2) The 60 Hz frequency is only available upon order. (3) According to EN16147, Delegated Regulation (EU) Nº812/2013 and Delegated Regulation (EU) Nº814/2013. |
|||||||||
| DIMENSIONS mm | 250IS | 300IS | 300ESMS | 250ISX | 300ISX | 500IS | 500ISX | ||
| A | 99 | 107 | 102 | 99 | 107 | 102 | 102 | ||
| B | – | – | – | 215 | 236 | – | 635 | ||
| C | – | – | – | 706 | 636 | – | 1525 | ||
| D | 840 | 787 | 782 | 840 | 787 | 782 | 782 | ||
| E | 1025 | 1096 | 1096 | 1025 | 1096 | 1096 | 1093 | ||
| F | 1343 | 1187 | 1182 | 1343 | 1187 | 1770 | 1770 | ||
| G | 1475 | 1330 | 1325 | 1475 | 1330 | 1937 | 1937 | ||
| H | 370 | 370 | 370 | 370 | 370 | 370 | 370 | ||
| I | 765 | 765 | 765 | 765 | 765 | 765 | 765 | ||
| J | 1540 | 1400 | 1430 | 1540 | 1400 | 2020 | 2020 | ||
| K | 580 | 650 | 650 | 580 | 650 | 650 | 650 | ||
| L | 800 | ||||||||
| M | 2000 | ||||||||
| N | 20 | ||||||||
| O | 875 | 945 | 945 | 875 | 945 | 945 | 945 | ||
Downloads
